S550 My Toy Build Thread Profile - S550 Mustangs

[JeffV8]

This is the Build Thread for My Toy. Reply below.

 

[302BOB]

Your Toy will always be in your heart as My Boss is in mine....Enjoy many miles together!!!

 

[JeffV8]

Your Toy will always be in your heart as My Boss is in mine....Enjoy many miles together!!!

Thanks

 

[JeffV8]

Car has been in storage since November and can’t work on it. So I buy parts and wait. First part installed is my left lane louvers.

 

[PLexo50]

How's that garage coming along?

 

[JeffV8]

Waiting for the Amish company to build and install it. Foundation and floor are done. Might start to pour the driveway.

 

[JeffV8]

Yesterday I installed my Optimum Performance wheel spacers and my Vorshlag brake cooler shields. If you have a PP with the plastic shield and use the original hardware you will need washers under the head of the bolts because they are shoulder bolts so the wouldn’t squeeze the plastic. If not the plate will not tighten up.

 

[Tonymustang302]

You’re making me rethink having my shelby be the track car and switch the 17 from drag setup to full out road race.

 

[JeffV8]

I have a friend with I think a 18 GT twin turbo street car , at the time no roll cage went 8.90’s @160. He had a full cage put in this winter lol

 

[Tonymustang302]

Limitless Performance has a daily driven car 8.01’s in the 1/4 twin turbo.....thats why my blue one is there....

but i have a feeling track days might take over my 1/4mile lust....which is why i may turn the blew into track only road race. I’ll see how much i drive it this year compared to track days with the shelby......and if corona doesnt kill my business. Then i’ll gut the blew one and turn it into a corner carver

 

[JeffV8]

This garage build has taken so much of my time. But it’s getting there.60,000 btu heater should arrive today. Out side painted gray. Trim needs to be painted . Insulation and drywall up.

 

[Bill Pemberton]

Nice.........how tall are your walls? Wondering if there is enough room for a lift as it appears so, but can't quite tell? Looks to me like it was well worth the wait and perfect year to do , since track time has been pretty limited throughout much of the US.

 

[JeffV8]

Nice.........how tall are your walls? Wondering if there is enough room for a lift as it appears so, but can't quite tell? Looks to me like it was well worth the wait and perfect year to do , since track time has been pretty limited throughout much of the US.

Bill, ceiling height is 11’6” and yes a 2 post lift will be installed next year. Next is the sheet rock for the ceiling. Not looking forward to doing that myself.

 

[Bill Pemberton]

Envious, my garage is just a bit short for a lift, but have considered doing another garage in the backyard like yours. Keep us up on the continuing build and considering doing drywall on the ceiling, well , that I am not envious of you at all, ha.

 

[Tonymustang302]

Bill, ceiling height is 11’6” and yes a 2 post lift will be installed next year. Next is the sheet rock for the ceiling. Not looking forward to doing that myself.

i hired someone to do that lol. I get so mad when i see everyone else not needing to use hard conduit. My city is so anal about it. they wouldnt even let me run separate service tot he garage so i can have 100amp Just to the garage, couldnt build over 600sqft....cant build over xxx height....cant have a radiant floor. Etc etc.

dont forget about the lights when you put up the drywall being above the rafters

 

[TMSBOSS]

Tony. It’s most of Dupage and Cook counties. I am sure it has nothing to do with the layers of inspections and the fees which go with the inspections. The only good news is you can add circuits later fairly easily.
Out here in the sticks, I build my home and shop on one low cost permit. Inspections from the county were available at a fee if you wanted to check on your subs.

 

[Fabman]

Car has been in storage since November and can’t work on it. So I buy parts and wait. First part installed is my left lane louvers.View attachment 15356View attachment 15357View attachment 15358

Now THAT'S a pretty car.

 

[Fabman]

i hired someone to do that lol. I get so mad when i see everyone else not needing to use hard conduit. My city is so anal about it. they wouldnt even let me run separate service tot he garage so i can have 100amp Just to the garage, couldnt build over 600sqft....cant build over xxx height....cant have a radiant floor. Etc etc.

dont forget about the lights when you put up the drywall being above the rafters

sounds like California...."no you can't do anything and now you gotta pay us just for asking".

 

[JeffV8]

i hired someone to do that lol. I get so mad when i see everyone else not needing to use hard conduit. My city is so anal about it. they wouldnt even let me run separate service tot he garage so i can have 100amp Just to the garage, couldnt build over 600sqft....cant build over xxx height....cant have a radiant floor. Etc etc.

dont forget about the lights when you put up the drywall being above the rafters

a detached garage under 1000 sq ft does not require any inspections. I had to pay $35 for a building permit from the township. You don’t think the lights will shine thru the drywall

 

[JeffV8]

Now THAT'S a pretty car.

Thanks Fabman