- Thread starter
- #181
Mad Hatter
Gotta go Faster
Its actually not that low, must a tad taller then P springs. the BMR lca bracket has three holes and I am in the top hole now.
The LCA angle is now just a tad more towarfs Antisquat then the OEM position.
I think the top BMR lca position is about a inch and a half from stock but will measure it again.
The LCA angle is now just a tad more towarfs Antisquat then the OEM position.
I think the top BMR lca position is about a inch and a half from stock but will measure it again.