Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
It never gets hot. I ran the 3 gauge’s in the dash/electronic cluster and I never saw it get close to red. Engine, differential and transmission temps. Didn’t pay attention to numbers.
I switched display between temps and tire pressure.
On or off... (see full post)
They changed some of the known problems including different springs.
What temps are u seeing on the track?
When u on track do you feel the shifting being erratic?
The alluminium pan does not cool down on track. And yes to check you go under the...
Hey man , thank you so much for the reply on the info. You nailed it.I do like that ride height one time slayer , and the other one that you posted , and I also need tires and wheels , so thinking maybe bill stevens , shocks or koni i can't... (see full post)
Man that world challenge suspension sounds hooked up ! Stock shocks tho huh ? Kinda surprising. Not sure i know what trailing arms are exactly? Im looking for the best handling not too too harsh on the street . Then maybe 5 or 6 track days... (see full post)
They changed some of the known problems including different springs.
What temps are u seeing on the track?
When u on track do you feel the shifting being erratic?
The alluminium pan does not cool down on track. And yes to check you go under the... (see full post)
Does the D valve body use higher quality, materials and manufacturing?
I don’t remember if I asked you before but how many miles did you get out of your stock 10R80? and how many miles did you get out of your better built 10R80? Did you find the... (see full post)
I put the PPE trans pan 5k miles ago. It is stupid that Ford put a plastic pan on it with no drain plug!
And no way to tell the fluid level other than putting the car up in the air and sliding your hand next to a possibly super hot exhaust.
And... (see full post)
YEP!! I have a few sets like yours. Then I swapped the ABS module in my Boss. No more nannies. I have saved the cost of the module in pad savings. (see full post)
Guys. Our old "Truck Axel" fords have a plug in the cover and a plug in the housing, at the front near the input yoke. The one in front, correct me if Im wrong, is the one you use to indicate correct level. Pull both plugs, add fluid through... (see full post)
More than a tire with the 26 offset? No way.All we are doing is moving the wheel out to match the same position as the stock 26 offset, so we can use the 52 offset from the rear wheel ( so we can rotate).I think the leverage would be exactly...
this happened to me in 2022. Crashed hard. Felt like I tripped and face planted while at a full on sprint speed. Cant imagine how folks in these environments survive - whether it be the athlete themselves or the crew.The big part folks don't...
A lot of times these guys push them selves to the brink, and they do it so often that they are comfortable living on that edge. I've seen crew guys go through ibuprofen like candy, consume energy drinks all day, I mean one of the reasons I...
Ok so main issue was a clutch.
Ok. Here's what I would do.
Stage 2 suncoast 10r80 kit. Increase number of clutches and upgrade them too.
I would change the body valve to a -D part number. The -D is the latest ford valvebody.
Also. I would add...