The Mustang Forum for Track & Racing Enthusiasts

Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.

  • Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!

Latest activity

Live updates
  • Junkyard Dog
    Junkyard Dog reacted to jklapko10's post in the thread Track Time Videos with Like Like.
    Turns out I am very bad at donuts/drifting(this is my first attempt). I've owned this car 6 years and have never tried it before last weekend. We were camped out on a skid pad at Inde Motorsports Ranch, I had worn my tires down to the cords so...
  • 2LowPony
    I didn't play with the settings too much, but when i did try have it on just to see how it functioned it was a bit aggressive. But it was on the street coming to a stop so I don't think it was a good baseline for me to try it on (see full post)
  • 2LowPony
    I mounted the switch on mine where the cabin air temp sensor goes. I just haven't played with the settings too much. I haven't had much time to dial it in like I want yet, hoping to do that before the HPDE event I have next month (see full post)
  • jklapko10
    jklapko10 replied to the thread Track Time Videos.
    Turns out I am very bad at donuts/drifting(this is my first attempt). I've owned this car 6 years and have never tried it before last weekend. We were camped out on a skid pad at Inde Motorsports Ranch, I had worn my tires down to the cords so... (see full post)
  • bnight
    Hmmm, it would make sense. And I actually might have 2 different calipers back there. One of my boots tore up a few years ago and I replaced one side. Now one side has a caliper with a black booth and the other side has an orange booth. The...
  • bnight
    @Akel I responded on your build thread, but those rear brake pad pictures you posted suggest a problem with one of your rear calipers. Which of course would cause all sorts of instability.
  • flyhalf
    Ok so main issue was a clutch. Ok. Here's what I would do. Stage 2 suncoast 10r80 kit. Increase number of clutches and upgrade them too. I would change the body valve to a -D part number. The -D is the latest ford valvebody. Also. I would add... (see full post)
  • TennTex
    TennTex reacted to honeybadger's post in the thread R.I.P. Kyle Bush with Like Like.
    this happened to me in 2022. Crashed hard. Felt like I tripped and face planted while at a full on sprint speed. Cant imagine how folks in these environments survive - whether it be the athlete themselves or the crew.The big part folks don't...
  • Remember, though, the adjusters are working on the valving that's built into the shocks with the shim stack. Typically, that 2:1 - 3:1 damping ratio is built into the baseline valving and you use the adjusters to tweak from there. That's...
  • 302BOB
    302BOB replied to the thread Bob's Ton of Posts!.
    Today's Cryptoquote............" Even if you're on the right track. you'll get run over if you just sit there."____________Will Rogers (see full post)
  • Duane Black
    Duane Black replied to the thread Track Time Videos.
    Looks like the outside is the place to be? Or was it just slwoer traffic holding up the inside?I got a new camera angle for the Muscrat. I built a mount with some PVC pipe and using a GoPro a SpecMiater guy passed off to me.Comparing to a... (see full post)
  • Duane Black
    Duane Black reacted to racer47's post in the thread Track Time Videos with Like Like.
    I'll add one to the oval videos Here's some Legends in car, good racing inside and outside passing and getting passed. A couple choose cone restarts. There is some vibration blur but it adds to the "being in the car" effect.
  • Hmmm, it would make sense. And I actually might have 2 different calipers back there. One of my boots tore up a few years ago and I replaced one side. Now one side has a caliper with a black booth and the other side has an orange booth. The... (see full post)
  • Remember, though, the adjusters are working on the valving that's built into the shocks with the shim stack. Typically, that 2:1 - 3:1 damping ratio is built into the baseline valving and you use the adjusters to tweak from there. That's...
  • Not agruing here...discussing. I'm curious how you run your dampers.You say, "...you want the compression to be as soft as possible." While I will agree that is 'a' way to run the damping, it's not the only way. I guess I would add to your...
  • No, I dont' think it was that particular thing. You have to figure something like that out even for the street. It was more about which coil-overs to buy and those fun little bunny-holes.
  • FastEd
    FastEd reacted to blacksheep-1's post in the thread Wheel Width v. Tire Width with Like Like.
    So we're going down this rabbit hole? Tire width really messes with a lot of other things and IMO generally falls under the file of demon tweeks to try and make something work that really doesn't want to work, or more likely a rule work around...
  • FastEd
    FastEd reacted to navbtcret's post in the thread HPDE tires with Like Like.
    The 3R's are everything I heard about. Big jump for me having only ever ran the PS4's in the past. Yes, they do not grip well in the cold and wet, but they are manageable as long as water is not running across the track or puddling. First two...
  • Akel reacted to stevbd's post in the thread S550 Stangmobile with Like Like.
    Those rear pads look like a big clue to the instability under braking that you’re reporting in your other thread. 3 of the 4 are down to metal but the 4th appears to have decent material left. I suspect you have a sticking or dragging rear...
Top