Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
@DarrylS76 the one thing the world challenge s197 didn’t have was stock shocks. Just the opposite, very high end Penske I believe. I think @blacksheep-1 is saying the rest of the car wasn’t too exotic, but the dampers were.Anyhow, your easy... (see full post)
The way mine is set it's way too aggressive for street driving. Unlike the newer Mustangs that have factory rev match, these give it the same throttle response no matter what. If I had it set for street driving I think it wouldn't work very well... (see full post)
If the rear brakes have an issue then that needs addressed before anything else.But I think someone new to HPDE trying to dial in adjustable dampers is an uphill battle, especially when they are a type without a large user base to provide good... (see full post)
It never gets hot. I ran the 3 gauge’s in the dash/electronic cluster and I never saw it get close to red. Engine, differential and transmission temps. Didn’t pay attention to numbers.
I switched display between temps and tire pressure.
On or off... (see full post)
They changed some of the known problems including different springs.
What temps are u seeing on the track?
When u on track do you feel the shifting being erratic?
The alluminium pan does not cool down on track. And yes to check you go under the...
Hey man , thank you so much for the reply on the info. You nailed it.I do like that ride height one time slayer , and the other one that you posted , and I also need tires and wheels , so thinking maybe bill stevens , shocks or koni i can't... (see full post)
Man that world challenge suspension sounds hooked up ! Stock shocks tho huh ? Kinda surprising. Not sure i know what trailing arms are exactly? Im looking for the best handling not too too harsh on the street . Then maybe 5 or 6 track days... (see full post)
They changed some of the known problems including different springs.
What temps are u seeing on the track?
When u on track do you feel the shifting being erratic?
The alluminium pan does not cool down on track. And yes to check you go under the... (see full post)
Does the D valve body use higher quality, materials and manufacturing?
I don’t remember if I asked you before but how many miles did you get out of your stock 10R80? and how many miles did you get out of your better built 10R80? Did you find the... (see full post)
I put the PPE trans pan 5k miles ago. It is stupid that Ford put a plastic pan on it with no drain plug!
And no way to tell the fluid level other than putting the car up in the air and sliding your hand next to a possibly super hot exhaust.
And... (see full post)
YEP!! I have a few sets like yours. Then I swapped the ABS module in my Boss. No more nannies. I have saved the cost of the module in pad savings. (see full post)