- Thread starter
- #21
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
06mach1 said:I am currently in the process of making another batch of grilles. I have the frames cut and bent, just need to get them welded next. Hopefully they will be at the powder coater by the end of the month. RFH and 682 LS, I will put you down on the list and let you know when they grilles go to the coater.
pufferfish said:Would you be willing to do some with 2 posts about 2" off the center for the Blowfish Racing Tow Hooks? I would be in for one if you could do that. you don't even need to cut out the hole, I just need the frame to not have a center post.
Hi Rusty, welcome to BMO. There's a couple of other thread on oil coolers with different mounting locations and you may want to check them out.Rusty67 said:New member here. I'm in for one for my 2012 LS. I'm thinking about mounting my oil cooler down where that lower opening is and I was worried about debris, this will definitely help.