- Thread starter
- #61
KNS Brakes
Supporting Vendor
Happy Friday
The Mustang Forum for Track & Racing Enthusiasts
Taking your Mustang to an open track/HPDE event for the first time? Do you race competitively? This forum is for you! Log in to remove most ads.
- Welcome to the Ford Mustang forum built for owners of the Mustang GT350, BOSS 302, GT500, and all other S550, S197, SN95, Fox Body and older Mustangs set up for open track days, road racing, and/or autocross. Join our forum, interact with others, share your build, and help us strengthen this community!
AP Racing BBK available for Boss 302 Front and Rear - KNS Brakes
- Thread starterKNS Brakes
- Start date
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
- Thread starter
- #62
KNS Brakes
Supporting Vendor
Happy Monday
- Thread starter
- #63
KNS Brakes
Supporting Vendor
Happy Friday
- Thread starter
- #64
KNS Brakes
Supporting Vendor
Happy Monday
I was at the IMSA race this past weekend and was surprised how many race cars used APR brakes. Has anyone installed one of these kits on their Mustang?
- Thread starter
- #66
KNS Brakes
Supporting Vendor
We are going to stop bumping this.
1. This kit is the AP "street" version distributed in the US by Stillen.
2. They cannot supply race pad or rotor support
3. It's ultimately not significantly better than the Brembo's already on the car.
The "racing" AP Racing kits and parts are all distributed by Essex Parts in NC. They have devised quite a few more track oriented kits for production vehicles (Corvette's, M3, STi, etc). These kits are based on AP's track parts which are made with many different features. The IMSA stuff si the top of that food chain.
Most of the Boss customers seem content w/ the Brembo's but we could have Essex jump in here to see if there is interest.
See C6/C7 example here.
http://www.essexparts.com/shop/complete-brake-systems/competition-brake-systems.html
-Ken
1. This kit is the AP "street" version distributed in the US by Stillen.
2. They cannot supply race pad or rotor support
3. It's ultimately not significantly better than the Brembo's already on the car.
The "racing" AP Racing kits and parts are all distributed by Essex Parts in NC. They have devised quite a few more track oriented kits for production vehicles (Corvette's, M3, STi, etc). These kits are based on AP's track parts which are made with many different features. The IMSA stuff si the top of that food chain.
Most of the Boss customers seem content w/ the Brembo's but we could have Essex jump in here to see if there is interest.
See C6/C7 example here.
http://www.essexparts.com/shop/complete-brake-systems/competition-brake-systems.html
-Ken
TMO Supporting Vendors
Similar threads
