Wow, you are running a giant footprint! Does anybody run 325's in front? I thought 315 square was big.
You'll have so much grip you'll need a G-suit next...
You'll have so much grip you'll need a G-suit next...
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Interesting, don't think I've seen that profile. I do know, secondhand, of folks running 325/30/r19, so I'm giving it a go. I'll pick them up Saturday and run them at Barber the following weekend, so I can let you all know how it works out.I’ve seen a picture of a GT350 with 325-25 square. So as long as there is clearance for the 30’s, I guess it should work
I found his build thread and here's his summary on running 18x13 wheels up front with 335 tires:I think @boardkat mentioned he uses 335 square. Fairly certain he has different fenders though
I'm having issues with sidewall wear, I also am running square 11.5's. Seems like the 3R/305's are too stretched on that wide of a rim, my were marks disappear after one session. How'd the 325's do??? I'm also probably going to run all the SPL parts up front with the Vorshlag so I can get at least 3*Interesting, don't think I've seen that profile. I do know, secondhand, of folks running 325/30/r19, so I'm giving it a go. I'll pick them up Saturday and run them at Barber the following weekend, so I can let you all know how it works out.
I'm having issues with sidewall wear, I also am running square 11.5's. Seems like the 3R/305's are too stretched on that wide of a rim, my were marks disappear after one session. How'd the 325's do??? I'm also probably going to run all the SPL parts up front with the Vorshlag so I can get at least 3*
Tru, but I can't get anymore camber with current setup, less than 1/2" away from struts, need to push the whole wheel assembly out a bit more, running 35mm spacers alreadyTire stretch makes the sidewalls stiffer, its not the stretch that is making them wear on the edges. A lack of camber or too low pressures or both are your culprits. Per above you are less than 3*, which for a tire as grippy as a 3R is way not enough for most any setup on our cars.
Got those, need the Vorshlag!Yeah camber plates for sure!