Hi Guy's, just change my oil pan with a Moroso unit. I would like to bring the oil pressure up before firing the engine Is there an easy way to prime the motor ...
Thanks
Thanks
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Grant 302 said:For my '11 and '12:
Depress clutch and mat gas pedal and crank. Lift gas when oil idiot light goes off. Engine will fire when you lift the gas.
FrenchBoss said:I had heard this way of doing the priming, I would be scared that the engine would fire up at WOT , I guess trusting the electronic's is a must on this one. Is there a fuse or sensor I could unplug, thanks for your help.
VoodooBOSS said:For fun I tried this on my 350 and it worked fine As soon as I released the gas while continuously holding the start button it fired right up.
Flyboygsxr said:Pull the ignition fuse in the engine compartment. It's the number 19 fuse. Pressing the gas pedal to the floor also works but if you're afraid of that not working pulling the fuse is a fail safe. Good luck
Adam
FrenchBoss said:I had heard this way of doing the priming, I would be scared that the engine would fire up at WOT , I guess trusting the electronic's is a must on this one. Is there a fuse or sensor I could unplug, thanks for your help.