Smokin' Discounted Prices on Hoosiers

[JScheier]

John, I'm assuming that was a used set?

Yes... take-offs from Greg. So $100/tire over 3 weekends (6 days, 24-30 sessions).

 

[2012YellowBoss]

Yes... take-offs from Greg. So $100/tire over 3 weekends (6 days, 24-30 sessions).

That is pretty good, I get 3-4 days on the 275's. They don't heat cycle but wear down, once I got the pressure correct the wear is even all the way accross.

BTW, I was going to hog out the shock towers and add camber. Was told the Conti's work best at about -3 degrees camber. I have -2.85 in now and might be able to get to -3 so I am leaving it there.

 

[cloud9]

That is pretty good, I get 3-4 days on the 275's. They don't heat cycle but wear down, once I got the pressure correct the wear is even all the way accross.

BTW, I was going to hog out the shock towers and add camber. Was told the Conti's work best at about -3 degrees camber. I have -2.85 in now and might be able to get to -3 so I am leaving it there.

Good to hear. I just hogged out my bottom strut holes and got -3.0. There's room to go further but that's where I set them.

 

[JScheier]

I just use Vorshlag plates and ride height... Can get -3 and then some...to the point it looks broken.

 

[JScheier]

FWIW, I mounted up the 295x40x18 Hoosier R6s on my 18x10 D-Force wheels. These things are gargantuan! Make the 305/650s look like temp tires. I might have to raise the rear ride height some to fit these things

 

[cloud9]

FWIW, I mounted up the 295x40x18 Hoosier R6s on my 18x10 D-Force wheels. These things are gargantuan! Make the 305/650s look like temp tires. I might have to raise the rear ride height some to fit these things

Nice! Feeling a little like a Vette? : Training wheels

 

[JScheier]

More like a Raptor