Cool VIN Plate Banner - Customized with Your VIN

[GottaBoss]

I saw this banner on EBay and thought it was pretty cool. I'd buy one if they' make it for the Boss. Anyone else interested?

Post here if you'd buy one for the Boss and if there's enough interest I'll send a link of this thread to the vendor and ask if they'll do it.

http://www.ebay.com/itm/221264770341?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

 

[Justin]

very nice, I would like one or two

 

[mcmmotorsports]

One for me.

 

[Smilieboy]

I'd consider it. ;D

 

[KDR-1]

I like it.

 

[Noellenchris]

I like it also, I also seen on their website that they have a smaller one for $29.99
http://ridge-top-designs.myshopify.com/products/1969-ford-mustang-boss-302-banner-sign-18x36

I'd personally like the smaller one if it was available.

Chris

 

[VoodooBoss]

Maybe Justin at Coolride Pix can make them.

 

[GottaBoss]

Maybe Justin at Coolride Pix can make them.

I just shot Justin an email and asked him to chime in here if he's interested.

Thanks for the suggestion, I'm always anxious to support forum vendors.

 

[rpm3dinc]

Let me do some checking around, but yes we could produce these.
What sizes would everyone want? So I can get quotes from my banner distributors.

3'x 2'? Or larger? Smaller?

 

[GottaBoss]

Let me do some checking around, but yes we could produce these.
What sizes would everyone want? So I can get quotes from my banner distributors.

3'x 2'? Or larger? Smaller?

The plate on the manifold measures 1-1/8" x 5-3/4". So to make the banner true to scale (which I would like) would make it 1' x 5'. For those wanting something smaller it could be 6" x 2'-6" and still to scale. If they had a border like the one in the photo of, say 3", it would make the final banner in the neighborhood of 1'-6" x 5'-6" or 1' x 3'.

OR

If more rectangular would work better the two halves of the plate could be stacked instead of side-by-side as the actual plate is. So this would be 2' x 2'-6" or 1' x 1'-3" and with border 2'-6" x 3' or 1'-6" x 1'-9".

I think I did that math right, please check me. :-\

I would like the 1'-6" x 5'-6" size (with border) with the same layout as the one on the manifold.

I'm obviously open to some changes - just trying to throw out ideas to get things going.

 

[Noellenchris]

The plate on the manifold measures 1-1/8" x 5-3/4". So to make the banner true to scale (which I would like) would make it 1' x 5'. For those wanting something smaller it could be 6" x 2'-6" and still to scale. If they had a border like the one in the photo of, say 3", it would make the final banner in the neighborhood of 1'-6" x 5'-6" or 1' x 3'.

OR

If more rectangular would work better the two halves of the plate could be stacked instead of side-by-side as the actual plate is. So this would be 2' x 2'-6" or 1' x 1'-3" and with border 2'-6" x 3' or 1'-6" x 1'-9".

I think I did that math right, please check me. :-\

I would like the 1'-6" x 5'-6" size (with border) with the same layout as the one on the manifold.

I'm obviously open to some changes - just trying to throw out ideas to get things going.

I like these sizes as well, wow, must have been punching in numbers on the calc for a bit.

 

[boss man]

I'm interested also.

 

[TymeSlayer]

Would certainly consider buying one as well.

 

[rpm3dinc]

So something like this?

 

[VoodooBoss]

So something like this?

I knew you were the right man for the job. 8)

 

[boss man]

Can you squeeze the owners name in or is that to much?

 

[rpm3dinc]

I can put the owners name in there, but something else has to be smaller.

 

[GottaBoss]

So something like this?

Close.

I'd like it to look exactly like the actual plate (photo below) including the Ford logo (and straight, of course).

After looking at the photo I think it would look nice to make the banner taller than the plate and include the silver vertical lines (above and below) that are on the manifold. This would also give you more leeway on proportion as you could include however much of the lines that works best.

 

[rpm3dinc]

Using the Ford Logo will require Ford Licensing and Design Approval from Ford.
So not sure I want to travel down that road or not.

As far as making the banner taller and including the intake moldings, that should be doable.

 

[GottaBoss]

Using the Ford Logo will require Ford Licensing and Design Approval from Ford.
So not sure I want to travel down that road or not.

As far as making the banner taller and including the intake moldings, that should be doable.

I wouldn't be interested without the Ford logo included.