The Mustang Forum for Track Enthusiasts

Track Mustangs Online was built specifically for those who track their Mustangs!

Register Log in

Ford Performance air/oil separator Boss 302 question

Spencer Terry

TMO Advanced
Messages
152
Reaction score
76
Location
Charlotte, NC
A2734492-9A6C-4EFC-8700-06C8718CB9E8.jpeg
3D24001C-1151-4FFE-A47C-5B44D5D9F25E.jpeg
Bought this kit used, seems the hose running from the intake to the can is a bit cramped. Does this look correct to you all? From what I’ve read it’s a universal kit for all 2011+ gt / boss 302 and gt350.

Thanks!!

Spencer
 

Coz

TMO Addict
Messages
801
Reaction score
606
Location
Philly Metro Area
That looks ok. It is tighter than what I originally had on my GT but the Boss probably has a wider radiator.

I upgraded mine to the Ford Racing Radiator and it is so thick that it pushed everything closer to the engine. So much so that I had to attach my stock coolant tank to the fan j-clips with zip ties instead of the stock bolts. Even with that, the coolant tank rubbed on the separator. I replaced it with a Moroso coolant tank that is much thinner than the stock unit.
 
Last edited:

Spencer Terry

TMO Advanced
Messages
152
Reaction score
76
Location
Charlotte, NC
Thanks for the response, i definitely feel like the GT with the lower intake would allow a bit more room for that connector. But should be fine, will keep an eye on it!
 

TMO Supporting Vendors

Latest posts

Buy TMO Apparel

Buy TMO Apparel
Top