First time running Hoosier R6's and the fronts are not wearing evenly. Both Left and Right (which I rotated evenly) are wearing more on the (original) location of the outer groove:
The wear is more pronounced than the photo's show. If this was mid tire I'd put it down to over inflation, but its in the outer 25-30%. I'm running 37* hot with 2.8* camber.
Only thing I can think is that with the 295's on 9.5 Enkei's the compression on the bead is causing the contact patch to be extended out. Any other ideas or experience?
Also after 14 cycles and 4 hours, they seen to be cycled out.
The wear is more pronounced than the photo's show. If this was mid tire I'd put it down to over inflation, but its in the outer 25-30%. I'm running 37* hot with 2.8* camber.
Only thing I can think is that with the 295's on 9.5 Enkei's the compression on the bead is causing the contact patch to be extended out. Any other ideas or experience?
Also after 14 cycles and 4 hours, they seen to be cycled out.