- 153
- 170
I was referring to a strut like in McPherson strut not inferring strut rods. Like in 16 - 17 degrees SAI vs 7 to 7-1/2 degrees SAI on SLAs. Just clearing that verbiage I'm using.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
So was I.....I've done mcPhearson strut cars, strut rod cars, A-Arm/Strut cars, SLA's, leaf spring cars....you name it. They all have their issues and workarounds.I was referring to a strut like in McPherson strut not inferring strut rods. Like in 16 - 17 degrees SAI vs 7 to 7-1/2 degrees SAI on SLAs. Just clearing that verbiage I'm using.
Drill your spindles and install a bolt through kit...
Top and bottom are Nylok, then there are 2 jamb nuts, which are part of the kit. I only added a washer and the cone spacers.I would like to congratulate you for using all available categories of fasteners on your BS kit.
necessity is a mother...or something like that.
Do tell....So I might have an idea of where the issue lies. More to come soon.
Sent from my iPhone using Tapatalk
More to come soon.
loose is fast..except when it comes to fasteners
loose is fast..except when it comes to fasteners