cloud9
Gary
I see your point, but I only ended up with 3" at one edge, so I'm inclined to leave that rather than cut both sides and end up with 1.5" pieces at each end. I'm not sure if it's square or not, but hopefully within the 3" front to back. I did order the ramp edges for the front by the garage door. I'll look at cutting the garage door rail off. What type of saw works best for cutting the tiles?KYBOSSLS said:Start with the center so that your end pieces are the same right & left side, start at the front of the garage door so that the back of the garage would have the cut pieces. Did you order the leading edge pieces? This is needed only at the doors, Hopefully your garage is square or close. Another suggestion is to cut the garage door rail at the floor, looks better and it won't hold dirt.
Thanks for the suggestions!
I linked in the PDFs of the Race Deck floor layout here in post # 981
http://forums.themustangsource.com/f813/random-pics-your-boss-302-a-496310/index50/#post6287660