I finally purchased my MGW shifter within the past month and there are a couple of design changes since their latest install video up on their site. The most notable is the rubber boot design. It is ribbed rather than smooth with the top slot offset to the RH side to allow more room for the reverse lock out.
I am having the hardest time getting the boot to sit properly in the body oval opening. The video states getting it flat and smooth with no "puckers". I get it pretty close, but when I bolt up the rear support, it wants to "pucker" up slightly on the passenger side.
Anyone have the latest version and can offer some words of wisdom?
I am having the hardest time getting the boot to sit properly in the body oval opening. The video states getting it flat and smooth with no "puckers". I get it pretty close, but when I bolt up the rear support, it wants to "pucker" up slightly on the passenger side.
Anyone have the latest version and can offer some words of wisdom?