I am installing a set of M-5638-C bushings into the M-3075-RA control arms......FRPP unfortunately does not provide instructions.
Some of you have installed them. Which way did you install the Aluminum/Delrin bushing into the control arm Sleeve?
I called the Ford Racing Tech Hotline today and was advised the bushings go in from the front side of the control arms. I mentioned that the bushing on the stock control arm is pressed in from the rear of the control arm. The hotline was going to ask a FRPP engineer for guidance and call me back today...but I never got the call.
Here is a picture of the two orientations when compared to the stock control arm bushing. I think the correct orientation is the one closest to the stock bushing....is this correct?
Stock Arm and M-3075-RA arms
Some of you have installed them. Which way did you install the Aluminum/Delrin bushing into the control arm Sleeve?
I called the Ford Racing Tech Hotline today and was advised the bushings go in from the front side of the control arms. I mentioned that the bushing on the stock control arm is pressed in from the rear of the control arm. The hotline was going to ask a FRPP engineer for guidance and call me back today...but I never got the call.
Here is a picture of the two orientations when compared to the stock control arm bushing. I think the correct orientation is the one closest to the stock bushing....is this correct?
Stock Arm and M-3075-RA arms