Brand new Steeda engine mounts failed on me after 1-1/2 track days. After day one I did notice some small red flakes coming from the bushing when I checked the bolts to make sure they were still tight but thought nothing of it. At Watkins Glen going into the S turns the steering got very hard. I thought I lost my power assist. Opened the hood and noticed the engine wasn't level. Jacked up the car and found the drivers side header resting on the steering shaft. Turns out the top red bushing disintegrated and must have fallen out and yes I had the rubber heat shield in there. I ended up moving the bottom black bushing to the top and used a brand new roll of heavy duty 3M electrical tape as the bottom bushing. It actually lasted the rest of the weekend with no issues. I did contact Steeda and have not received a response. Can anyone recommend a better/safer option for engine mounts for a dedicated track car. Thanks
Last edited: