ArizonaGT said:dude they are lugnuts who gives a shiznit what color they are
Did you have a honda before this?
+1
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
ArizonaGT said:dude they are lugnuts who gives a shiznit what color they are
Did you have a honda before this?
VA Boss said:bulldogracer said:Nice2BEtheBOSS said:bulldogracer said:here is one of my winter mods. I went with the TSW Nurburgring wheels with NITTO INVO tires. Still deciding on color of lugmuts & center cap.
Hi Bulldog,
what size bronze tsw is that? Also, do you have pictures of the entire car with the tsw wheels? Thanks!
These are the matte gunmetal not the bronze. The bronze to me looked really brown with the kona blue & ugly. I don't have all the hardware to mount them all yet on the car. The sizes I went with are 19x9 +32 & 19x9.5+41. They weigh 22 lbs.
Awesome looking wheels bulldog!
Three questions - 1) Stock Boss wheels call for +42/Front and +45/Rear, did your wheel dealer indicate your wheels have proper offsets for your Boss? ; 2) what did your wheels run? and; 3) are these 19"?
I am really torn between keeping the stock wheels that will be coming on my 13 LS or, getting a set of your wheels. I love the color.
VA Boss
What are you & Arizona GT jealous? These were just holding the wheels on for looks. BY the way they are racing lugnuts (1/2 the weight of stock) that I used on my 69 Boss 302 vintage race car for less sprung weight. Go drive your Honda's.06GT to 13LS said:ArizonaGT said:dude they are lugnuts who gives a shiznit what color they are
Did you have a honda before this?
+1
Nice2BEtheBOSS said:Can we get some pictures of the wheels BMO members have on their Boss 302's? Or the kind of aftermarket wheels they are planning on getting? I haven't seen this topic posted and if there is I apologize for the repost...
I'm considering the following wheels:
HRE P40, RTR, TSW Nurburgring
The HRE's are the ones I really want but they are VERY pricey. I live about 10 minutes away from the HRE factory.
bulldogracer said:TSW is distributed thru Discount Tire in US. When they talked to TSW, TSW recommened a 19x8.5+20 for the front. Said this is what all other Mustang owners were running on front. They sent a set for trial fit. I tried them and they stuck out too far, past fender. Discount Tire was nice enough to order 19x9+32 & 19x9.5+41 for trial fit. Yes your correct on the stock offsets. The probem with the fit is the center hub thickness for clearence to rotor hub cap for the decorative center cap from TSW to fit. To me the +32 fits fine under the fender, the 9.5+41 would work too in the front except for center cap. This size fits find in the rear because the axle hub doesn't stick out into the center of the wheel. I paid $275 each.
Sesshomurai said:Nice2BEtheBOSS said:Can we get some pictures of the wheels BMO members have on their Boss 302's? Or the kind of aftermarket wheels they are planning on getting? I haven't seen this topic posted and if there is I apologize for the repost...
I'm considering the following wheels:
HRE P40, RTR, TSW Nurburgring
The HRE's are the ones I really want but they are VERY pricey. I live about 10 minutes away from the HRE factory.
Will those HRE P40's fit the boss? I tried finding them on one wheel site that carries them and it didn't get listed for the 2011+ Mustang GT.
BossFred said:The HRE wheels look Hot !
ArizonaGT said:
jeepinocala said:These are kinda growing one me a bit when I decide I may go to 18" for the sidewall they should be better for the streets as for dragracing. http://www.steeda.com/store/steeda-black-pentar-wheels-for-ford-mustang.html
I've looked at those before and like them a lot.jeepinocala said:These are kinda growing one me a bit when I decide I may go to 18" for the sidewall they should be better for the streets as for dragracing. http://www.steeda.com/store/steeda-black-pentar-wheels-for-ford-mustang.html
5 DOT 0 said:Please stay focused on aftermarket wheels and give the lug nuts a rest.
Yep those would work. ;DArizonaGT said:How about some 18x9.5 black 302S wheels?