- Thread starter
- #141
There's a recall on an intake??? :
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
NFSBOSS said:There's a recall on an intake??? :
From my vendor, he's been great unlike Ford Racing;NFSBOSS said:There's a recall on an intake??? :
hmm they had lots of problems with their 3V intakes that came out years ago. guess I will hold off for a year or two till they get all the bugs outBOSSPOWER said:From my vendor, he's been great unlike Ford Racing;
"Hey I just got a call from Ford Racing saying they are recalling the intakes . At high rpm and low throttle you can get a bad vacuum leak. Let me know if you want me to pursue this matter for you"
Well, if can get one first , my suggestion is to wait on the revised versions. I do not think that FR will be selling any of the current batch.The masterg8 said:is it safe to buy a cj intake if there is a recall. I was about to purchase one, but I dont want to pick one up if they are defective.
NFSBOSS said:There's a recall on an intake??? :
NFSBOSS said:Like many of you I'm anxiously awaiting info and dyno numbers on this new intake. For those that install and tune your cars please post up your results and what other mods you're running. In one of the magazine articles a Ford engineer that worked on the intake stated there was a 25 HP increase with peak power moving up to 7,750 RPM's. The intake will require a different throttle body and tune so I'm not sure how much those two items counted towards the 25 HP if at all but it looks very good. You'll also want the high RPM pulse ring. Here are some links.
Parts list:
CJ Intake
Twin 65MM CJ Throttle Body
123MM Mass Air Flow Sensor
Competition High Rev Pulse Ring
Air Inlet/Filter
Tune
http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=22445
http://mustangsdaily.com/blog/2013/01/11/new-product-ford-racing-cobra-jet-intake-manifold-for-the-2011-2014-mustang-gt/
http://blog.americanmuscle.com/cobra-jet-intake-release-mustang-gt/
http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=11688
NFSBOSS said:Like many of you I'm anxiously awaiting info and dyno numbers on this new intake. For those that install and tune your cars please post up your results and what other mods you're running. In one of the magazine articles a Ford engineer that worked on the intake stated there was a 25 HP increase with peak power moving up to 7,750 RPM's. The intake will require a different throttle body and tune so I'm not sure how much those two items counted towards the 25 HP if at all but it looks very good. You'll also want the high RPM pulse ring. Here are some links.
Parts list:
CJ Intake
Twin 65MM CJ Throttle Body
123MM Mass Air Flow Sensor
Competition High Rev Pulse Ring
Air Inlet/Filter
Tune
http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=22445
http://mustangsdaily.com/blog/2013/01/11/new-product-ford-racing-cobra-jet-intake-manifold-for-the-2011-2014-mustang-gt/
http://blog.americanmuscle.com/cobra-jet-intake-release-mustang-gt/
http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=11688
lbp said:Hiya,
Mustangs Daily seems to be saying that this new intake will not fit the Boss due to strut tower brace interference.
- Did I read it wrong?
Anyone know??
Thx.
ArizonaGT said:Not to be a jerk, but please scroll up this page about 2 replies before yours.
nz05gt said:
NewBossowner said:What CAI did you use or did you have to fabricate?
nz05gt said:can be done though