- Thread starter
- #481
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Decals arrived - Thanks!!
Finished up the Race steering wheel install. Wired red buttons for horn.
View attachment 3593
Ended up opening up the clock spring and using the rear half with a slot cut in the bottom as the male SCCM connector:
View attachment 3594
Then ran the ribbon under the column behind the air bag cover using the front half of the clock spring as the gauge pigtail connector, zip tied in place. This approach allows re-use of the clock spring retaining screws in the column to prevent the SCCM connector shaking loose and re-uses the clock spring housing at each connector to protect the folded portions of the ribbon.
Monted the multi way switch on the airbag panel (Airbag removed).
View attachment 3595