Stealthy
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Sean,Sean said:Sorry about the delay!! I took these 4 days ago I think and have been completely forgetting to post them!! I also found my receipt for the headers. The coating was $700.00 while the shipping was $60.XX for those who are interested.
It is hard to make out but in between the last two primaries on the right is my serial number with Jet-Hot if I ever have to do a warranty claim.
Some close ups of the coating to show its rough texture.
Bye bye pretty Kooks label
patrickshelby said:Sean,
No issue between the driver side header and the steering column shaft to the rack? Enough clearance?
302 Hi Pro said:Sean:
You shouldn't have any clearance issues. Looking at my street header install, (if they are any indication), you'll have plenty of room to clear the Jet Hot coating.
Do you have the engine back from your builder? If not, do you have a pick up date?
With all of the time, research, money, etc, you have in this build project, you must be very excited to have a completion date in mind, or planned. I'd be like a 6 year old waiting for Santa to arrive!
Good luck and wishing you all the best in completing this project successfully.
302 Hi Pro
Sean said:Hey Dave,
I was going to fill in the Powered by Ford as well as those line with some Everclear Polyfill and sand it down smooth. From there I was thinking of either Gloss Black or Carbon fiber Vinyl with the design printed on it and a few coats of clear over that. I still have to talk to some body shops to see if that is possible.
Or I was going to fill it and just paint it gloss black and stick the decal right on there that way.
ArizonaBOSS said:600whp? What did I miss?
TMSBOSS said:Turbos??
Crank HP?