JScheier
Too Hot for the Boss!
Sorry - that's what I get for answering this post from my phone.
I have the FRPP rear lower control arms with the spherical bearings:
http://www.latemodelrestoration.com/item/M5649S/2005-12-Mustang-Rear-Lower-Control-Arms-M-5649-S
These things clunk like mad.
The bearing is tight in the arm
The bushings are tight in the bearing (bushings space the arms off of the mounts)
The only thing I can figure is that the bolt that goes through the bushing (steel) and bearing is a smaller OD than the ID of the bearing/bushing combination. I've torqued them to 130 lbft... not going to torque them further.
I have the FRPP rear lower control arms with the spherical bearings:
http://www.latemodelrestoration.com/item/M5649S/2005-12-Mustang-Rear-Lower-Control-Arms-M-5649-S
These things clunk like mad.
The bearing is tight in the arm
The bushings are tight in the bearing (bushings space the arms off of the mounts)
The only thing I can figure is that the bolt that goes through the bushing (steel) and bearing is a smaller OD than the ID of the bearing/bushing combination. I've torqued them to 130 lbft... not going to torque them further.