Hey guys gonna give a bit of context first. Earlier today I had a friend who works at a local Ford install for me the Ford Performance Track Handling Pack, excluding the sway bars. I bought them used off another friend who tracks his 2015 GT, but has since upgraded to coil overs. I have a 2019 Mustang GT PP1 non-magneride for reference. I'm not the most mechanically inclined so don't quote me. He mentioned the center bolt in the front strut hat is shot. something about the bearing inside is shot. car drives fine and straight. When I got on the highway I weaved around a bit and all felt fine. I do definitely hear a clunky sound when i go over bumps down local streets. From what another friend told me, i believe basically the strut is moving too much in the vertical axis, causing the sound. Obviously needs to be fixed. What im wondering is, can i just swap hats with my OEM PP1 strut hats? I asked Gemini and it mentioned the durometer between the track handling pack and oem PP1 might not be the same? I'd assume if the hats are identical you'd just compress the spring and do a hat swap, problem solved?? Lastly the only part I'm failing to understand is the friend i bought them from said it had camber plates. They looked like a horseshoe. There were slots that the studs would slide through. They don't look like the rotary shaped camber plates that I see when I google the term. When installed on my car though, the only thing you see from the under the hood are the 3 studs with nuts coming through which Gemini said means there's no camber plates? I'm unsure what needs to be replaced or fixed to fix the issue. Any and all thought and input is greatly appreciated. P.S. don't buy used stuff.

I know you said not to quote you, but "the center bolt is shot?" In what way? Is it stripped? Is it tight and torqued properly? If it is just the bushing . . . I mean, you are going to need to do some diagnosis.

P.S. check your sway bar end links, too, just in case.

Watch some front strut removal and replacement videos to kind of figure out how it is done and what the parts are and the proper procedure, so you can know if it was performed correctly.

like this (but watch several to get a better idea):

Junkyard Dog said:

I know you said not to quote you, but "the center bolt is shot?" In what way? Is it stripped? Is it tight and torqued properly? If it is just the bushing . . . I mean, you are going to need to do some diagnosis.

P.S. check your sway bar end links, too, just in case.

Click to expand...

OP described a bad bearing in the strut mount. This is fairly common. The mount should be replaced.

Junkyard Dog said:

I know you said not to quote you, but "the center bolt is shot?" In what way? Is it stripped? Is it tight and torqued properly? If it is just the bushing . . . I mean, you are going to need to do some diagnosis.

P.S. check your sway bar end links, too, just in case.

Click to expand...

Mechanic is saying bushing it shot

would you be changing out the strut mount yourself? Since the car already has the F.P. springs on it, it would not be that difficult to do it with a buddy to help. Also since you only want to do it once buy a new set of camber plates. Steeda has a good priced set.

1 old racer said:

would you be changing out the strut mount yourself? Since the car already has the F.P. springs on it, it would not be that difficult to do it with a buddy to help. Also since you only want to do it once buy a new set of camber plates. Steeda has a good priced set.

Click to expand...

No I’m gonna bring it back to my buddy who works at Ford. Just brought it to my friends house who sold them to me. Threw it on his lift. He spoke to the Ford friend who installed them and agreed that the top strut mounts are probably worn out. It’s the same part # as the OEM PP1 top strut mounts so the plan it to just swap them around and all should be fine. He took it for a spin with me and somewhat heard the noises I was saying I heard, but said it’s nothing to freak out over but to still change them out. The bigger problem was my Ford friend torqued the damn lugs on so tight we thought we’d break a stud lol. Gonna swap mounts than get alignment done.

Zellion_GT said:

my Ford friend torqued the damn lugs on so tight we thought we’d break a stud lol.

Click to expand...

Concerning

Junkyard Dog said:

Concerning

Click to expand...

agree