*** UPDATED with more extensive list in PDF below ***
Best efforts from different sources, so no guarantee that they are all accurate
For the Boss I put together a cheat sheet of key modification/maintenance item torque values, using the Ford Racing 302S data sheet as a start point. I'm starting from scratch with the GT350, but here are the items I have researched so far. Best efforts from different sources, so no guarantee that they are all accurate. Also several of these are specific to the GT350 and will not apply to the other S550 models:
--------------------------------N-m---------ft-lbs--------Socket/Wrench
Oil Filter..................................23..............17..............74.2mm 14 flute
Under-tray / Filter access...................................................7mm
Transmission Drain/Fill........28...............21.....................3/8" sq
Differential Fill Plug...............34..............25.....................3/8" sq
Front Caliper Bolts................185.............136......................T60
Front Caliper Bleeder..............19..............14......................11mm
Rear Caliper Bolts..................110..............81......................15mm
Rear Caliper Bolts (17MY).....115..............85......................18mm
Rear Caliper Bleeder................14.............10.......................11mm
Caliper Banjo Bolt (F & R)......40.............30......................13mm
.
Rear Camber Bolt...................115.............85......................18mm
Rear Toe Bolt..........................175............129
Rear Wheel Hub.....................133.............98
Rr Spindle (torque plus 45*)..133.............98.....................32mm
Vertical link upper..................103............76
Vertical Link lower..................175...........129
.
Front Seat Bolts.......................47..............35.......................T50
Watson Hoop with M8 10.9... 34..............25
Watson Roll Bar Rear Legs.....68.............50......................13mm
.
Strut to Steering Knuckle......250...........184...................21/24mm
Sway Bar Link to Strut...........115.............85....................17/18mm
Strut Shaft Nut.......................103.............76....................21/10mm
MM Strut tower nuts...............63.............46......................15mm
Strut Tower Cross Brace..........55.............41......................15mm
Tie Rod Jam nut.....................103.............76...................24/15mm
.
Spark Plug.................................15.............11.......................5/8"
Coil on Plug (torque plus 45*)... 7..............5
.
Splash Shield Retainers - M6.....8.............6
Front Splitter - M4.2.................1.9...........1.5
Front Splitter -M6......................8.............6
.
If others have key modification/maintenance data points, please post up, and I'll try to keep the list current.
@VoodooBOSS
@cloud9
@fuhrius
@StigsBaldBrother
@Moto
@jas427
@ChopSui
@mattlqx
@8250RPM
Updated to add socket/wrench sizes. Dual values are where a holding wrench/socket is needed.
Best efforts from different sources, so no guarantee that they are all accurate
For the Boss I put together a cheat sheet of key modification/maintenance item torque values, using the Ford Racing 302S data sheet as a start point. I'm starting from scratch with the GT350, but here are the items I have researched so far. Best efforts from different sources, so no guarantee that they are all accurate. Also several of these are specific to the GT350 and will not apply to the other S550 models:
--------------------------------N-m---------ft-lbs--------Socket/Wrench
Oil Filter..................................23..............17..............74.2mm 14 flute
Under-tray / Filter access...................................................7mm
Transmission Drain/Fill........28...............21.....................3/8" sq
Differential Fill Plug...............34..............25.....................3/8" sq
Front Caliper Bolts................185.............136......................T60
Front Caliper Bleeder..............19..............14......................11mm
Rear Caliper Bolts..................110..............81......................15mm
Rear Caliper Bolts (17MY).....115..............85......................18mm
Rear Caliper Bleeder................14.............10.......................11mm
Caliper Banjo Bolt (F & R)......40.............30......................13mm
.
Rear Camber Bolt...................115.............85......................18mm
Rear Toe Bolt..........................175............129
Rear Wheel Hub.....................133.............98
Rr Spindle (torque plus 45*)..133.............98.....................32mm
Vertical link upper..................103............76
Vertical Link lower..................175...........129
.
Front Seat Bolts.......................47..............35.......................T50
Watson Hoop with M8 10.9... 34..............25
Watson Roll Bar Rear Legs.....68.............50......................13mm
.
Strut to Steering Knuckle......250...........184...................21/24mm
Sway Bar Link to Strut...........115.............85....................17/18mm
Strut Shaft Nut.......................103.............76....................21/10mm
MM Strut tower nuts...............63.............46......................15mm
Strut Tower Cross Brace..........55.............41......................15mm
Tie Rod Jam nut.....................103.............76...................24/15mm
.
Spark Plug.................................15.............11.......................5/8"
Coil on Plug (torque plus 45*)... 7..............5
.
Splash Shield Retainers - M6.....8.............6
Front Splitter - M4.2.................1.9...........1.5
Front Splitter -M6......................8.............6
.
If others have key modification/maintenance data points, please post up, and I'll try to keep the list current.
@VoodooBOSS
@cloud9
@fuhrius
@StigsBaldBrother
@Moto
@jas427
@ChopSui
@mattlqx
@8250RPM
Updated to add socket/wrench sizes. Dual values are where a holding wrench/socket is needed.
Attachments
Last edited: